manualshive.com logo in svg

Midas PRO6, Owner'S Manual

Share
Download
Midas PRO6 Owner'S Manual Download Page 135

Linking the master channels

109

PRO6 Live Audio System
Owner’s Manual

Linking the master channels

You can link the left, right and centre master channels in a two-way link (left and right) 
or even a three-way link (left, centre and right).  Both types of link use the linking 
parameters set for the left master channel.

>> To link the left and right master channels

1

In the left master channel (control surface), press its quick access button (just 
above the fader) to select it.

2

Set the stereo linking options for the left master channel, see “To set the stereo 
linking options for a channel pair” on page 108.  These settings will apply to the 
linked stereo pair.

3

Click LNK.

>> To create a three-way master channel link

The centre channel can only be linked to a left/right master pair.  If necessary link the 
left/right master channels (as detailed above).  Then, click LNK in the configuration 
processing area of the mono master channel.

Summary of Contents for PRO6







































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands