Microscan Quadrus EZ, User Manual, Page: 84 / 366

3-30
Quadrus EZ Reader User’s Manual
Store Noread Image
Store Noread Image
Note: Stored images will be lost whenever RAM is reset by re-powering or reset/save
sequences, the capture mode is changed, or a read rate mode is initiated.
Image Storage Type
Image Storage Mode
Usage:
Useful for evaluating symbols and visually comparing images captured at
various settings and conditions.
Definition:
Images that are captured and processed but are not decoded may be
stored for subsequent evaluation.
Function:
The number of available slots for storage depends on the capture mode. If
in Rapid Capture, the number of images available for storage is the Rapid
Capture maximum (which is 8) less the number actually set in Capture
Number. For example, if Capture Number is set to 6, then only
2 images
will be available for storage. If in Continuous Capture mode, the number
of images available for storage is the maximum number set in Capture
Number less 3.
Usage:
Useful for evaluating symbols and visually comparing images captured at
various settings.
Definition:
When Disabled is selected, all saved images will be cleared and no further
images will be stored unless Store on Noread is selected.
Serial Cmd: < K244,image storage type ,image storage mode>
Default: Disabled
Options: 0 = Disabled/Clear 1 = Store on Noread
Definition:
Outputs the first or last noread images, as selected.
In First mode, images will be stored until the available image memory has
been filled. At this point the unit will stop storing additional images and the
first images stored will be available.
In Last mode, the last images stored will be available. After the available
memory has been filled, images will continue to be stored by purging the
oldest image in the storage memory.
Serial Cmd: < K244, image storage type, image storage mode >
Default: First
Options: 0 = First Images 1 = Last Images