Microscan Quadrus EZ, User Manual, Page: 112 / 366

4-28
Quadrus EZ Reader User’s Manual
Composite
Composite
When set to Enabled or Required, will attempt to decode the composite component of a
linear symbol. The linear symbol can be RSS14, RSS Expanded, RSS Limited, UCC/EAN-
128, UPC-A, EAN-13, EAN-8, and UPC-E.
Enabled
If set to Enabled it only decodes the linear component, it will output only the linear component.
Required
If set to Required, it must decode both the linear and the composite components; otherwise
it outputs a noread.
Separator Status (Composite)
Separator Character (Composite)
Note: If Separator Character has been changed to any other character and you wish to
re-define the separator as a comma, you will need to use ESP or the embedded menu.
Usage: Allows reading by both linear and 2D readers.
Definition:
Combines 2D and linear width modulated symbology on the same symbol
where different messages can be read by each reader type.
Serial Cmd: < K453,mode ,separator status,separator>
Default: Disabled
Options: 0 = Disabled 1 = Enabled Required
Usage: Allows user to distinguish between the main and Supplemental symbols.
Definition: This separator separates the linear symbol and the composite component.
Serial Cmd: < K453, mode, separator status ,separator>
Default: Disabled
Options: 0 = Disabled 1 = Enabled
Usage: As required by the application.
Definition:
Allows the user to change the separator character from a comma to a new
character.
Serial Cmd: < K453, mode,separator status, separator >
Default: , ( comma )
Options: Any ASCII character