Microscan Quadrus EZ, User Manual, Page: 227 / 366

Quadrus EZ Reader User’s Manual
9-19
Camera Setup
Image Processing Settings
Image Processing Settings control the amount of processing that occurs before an
image is displayed.
Processing Mode
Multiple Symbols in Fast Linear Mode
Applies to For Fast Linear processing mode only.
Usage:
Standard mode should decode over 90% of symbologies.
Mode 1 is useful for QR code and narrow-margined symbols.
Mode 2 and Mode 3 are intended for multiple symbols in the same FOV.
Mode 3 can also be used for narrow-margined symbols and large QR code
with large position detection patterns.
Mode 4 applies to Data Matrix only and is used in rare cases to improve
readability.
Mode 5 is for used to increase decode rates of linear symbols that are
presented in the picket fence direction.
Definition:
Processing modes can affect processing time and image quality.
Typically Standard mode should perform quickly and adequately in most
cases. Modes 1, 2, and 3 may slow down processing slightly but might be
recommended in certain usages.
Serial Cmd: < K513,processing mode >
Default: Standard
Options:
0 = Standard 1 = Mode 1 2 = Mode 2
3 = Mode 3 4 = Mode 4 5 = Fast Linear Mode
Usage: Used to process more than one symbol appearing in the FOV
Definition: Searches for one or two symbols in the FOV, as defined.
Serial Cmd: < K518,number of symbols >
Default: 0
Options: 0 to 2