Microscan Quadrus EZ, User Manual, Page: 119 / 366

Quadrus EZ Reader User’s Manual
5-3
I/O Parameters
I/O Parameters Serial Commands
Symbol Data Output < K705, symbol data output status,when to output>
Noread Message < K714, noread message status,noread message>
Bad Symbol Message < K715, [unused],message>
No Symbol Message < K716, [unused],message>
1D/Stacked Symbology Qualifi-
cation
< K717, minimum number of bars,minimum number of qualified scans,start/stop status>
2D Symbology
Qualification
< K718, finder pattern status,symbol size mode,symbol size 1,symbol size 2,symbol size
tolerance,dimension mode,dimension 1,dimension 2,dimension tolerance,orientation
mode,orientation value>
Read Duration Output < K706, status,separator>
LED Indicators < K750, green flash mode,x-pattern status,green flash duration>
Beeper < K702, beeper status>
LED Configuration < K737, LED mode,ISO/IEC 15415 grade,DPM grade>
Serial Verification < K701, serial command echo status,serial command beep status,control/hex output>
Video Output < K760, video output mode,trigger image mode,image frame>
Image Output < K739, image output mode,comm port,file format,JPEQ quality>
Image Captioning < K762, mode>
Synchronous Trigger < K761, synchronous trigger mode>
EZ Button < K770, global status,default on power-on,load IP database,save for power-on>
EZ Button Modes < K771, position 1 mode,position 2 mode,position 3 mode,position 4 mode>
Input 1 < K730, input mode,active state>
Output 1 Parameters < K810, output on,active state,pulse width,output mode>
Trend Analysis Output 1 < K780, trend analysis mode,number of triggers,number to output on>
Symbol Quality (ISO/IEC
15415) to Output 1
< K800, output on symbol contrast,symbol contrast threshold,output on print growth,print
growth threshold,output on axial non-uniformity,axial non-uniformity threshold,output on
unused ecc,unused ecc threshold>
Symbol Quality (Inkjet/Direct)
to Output 1 < K820, output on dot center offset,dot center offset,output on cell fill,cell fill,output on dot
ovality,dot ovality threshold,output on angle of distortion,angle of distortion threshold>
Diagnostic Warnings
to Output 1
< K790, over temp,service unit,external camera disconnect>
Output 2 < K811, output on,active state,pulse width,output mode>
Trend Analysis Output 2 < K781, trend analysis mode,trigger evaluation period,number to output on>
Symbol Quality (ISO/IEC
15415) to Output 2
< K801, output on symbol contrast,symbol contrast threshold,output on print growth,print
growth threshold,output on axial non-uniformity,axial non-uniformity threshold,output on
unused ecc,unused ecc threshold>
Symbol Quality (Inkjet/Direct)
to Output 2 < K821, output on dot center offset,dot center offset,output on cell fill,cell fill,output on dot
ovality,dot ovality threshold,output on angle of distortion,angle of distortion threshold>
Diagnostic Warnings
to Output 2
< K791, over temp,service unit,external camera disconnect>
Output 3 < K812, output on,active state,pulse width,output mode>
Trend Analysis Output 3 < K782, trend analysis mode,trigger evaluation period,number to output on>
Symbol Quality (ISO/IEC
15415)
to Output 3 < K802, output on symbol contrast,symbol contrast threshold,output on print growth,print
growth threshold,output on axial non-uniformity,axial non-uniformity threshold,output on
unused ecc,unused ecc threshold>
Symbol Quality (Inkjet/Direct)
to Output 3 < K822, output on dot center offset,dot center offset,output on cell fill,cell fill,output on dot
ovality,dot ovality threshold,output on angle of distortion,angle of distortion threshold>
Diagnostic Warnings
to Output 3
< K792, over temp,service unit,external camera disconnect>