Microscan Quadrus EZ, User Manual, Page: 46 / 366

2-20
Quadrus EZ Reader User’s Manual
RS-232 Auxiliary Port
Daisy Chain Remote Secondary Reader ID
Note: Not in ESP.
Daisy Chain Reader Number
Daisy Chain Reader ID
Note: After a secondary reader accepts a new ID, it automatically invokes a reset-with-
save command.
Usage:
This command provides a handy way to assign custom daisy chain IDs to
specific readers that were assigned during the daisy chain autoconfigure
process.
Definition:
Assigns a new daisy chain ID to a daisy chain secondary reader. The com-
mand is sent to the master reader to configure the other secondary readers.
Definition:
Specifies the target reader (by sequential number) which will be receiving the
new Daisy Chain ID. The master reader is always 0 (zero). All secondary read-
ers are numbered 1...n in the order that they are connected.
Note: These numbers are for assigning IDs only and are not
changeable.
Serial Cmd: < K151,daisy chain reader # ,daisy chain reader ID>
Options: 1....n (0 for the master reader)
Definition:
A two-character user-defined ASCII message identifying a reader in the
daisy chain.
Serial Cmd: < K151, daisy chain reader #, daisy chain reader ID >
Default:
Sequential numbering of reader units resulting from the Daisy Chain Auto-
configure
<K150> command; for example: ID Master = 1/ ;
ID Reader 1 = 2/ ; ID Reader 2 = 3/ ; etc.
Options: Any two characters except NULL < , or > .