Microscan Quadrus EZ, User Manual, Page: 211 / 366

Quadrus EZ Reader User’s Manual
9-3
Camera Setup
Video
In the Camera menu you can locate and capture images just as you did in the EZ Mode
when first starting ESP.
Locate
Turns on the blue X-pattern to help you center the symbol in the field of view.
Calibrate
If you haven’t already calibrated the symbol,
1. Click the Locate button and center the X pattern over the symbol.
2. Click the Calibrate button to optimize read rate.
The reader will search through various IP (image processing) settings and match
them with the highest read rates.
A successful calibration will display the calibrated symbol image a message, “Calibrated
successfully”.
3. Click Close on the Calibration dialog.
After a short wait, the symbol’s data and related features will be presented under the
“Symbol Information” box below the image display window, as shown in the following
example:
Calibrate by Serial Command
Send <op,6,1> to begin calibration. Send <op,6,0> to terminate calibration.