Microscan Quadrus EZ, User Manual, Page: 14 / 366

1-2
Quadrus EZ Reader User’s Manual
Check Required Hardware
Step 1 — Check Required Hardware
To get started with just the EZ Button
You will need:
• A Quadrus EZ Reader ( 1 ), FIS 6700-XXXX.
• An IB-150 Kit, 98-000040-02, which includes a cable, 61-000034-02, and the IB-150
Interface Box ( 2 ), 99-000008-02.
• A Power Supply ( 3 ), 97-100004-15 (90-264 VAC, 24VDC).
If connecting to a host by RS-232
You will also need the following:
• A host computer with either a terminal
communications program or Microscan’s
ESP, which runs under Windows operating
system, Windows 98 or higher.
• An IB-150 Host Communications Cable ( 6 ),
61-000034-02 (25-pin socket to 9-pin socket).
• Object Detector ( 5 ) (optional), 99-000017-01.
If connecting to a host by TCP/IP
See Chapter 15, Ethernet .
RE AD ER
A
U
X
P
O
R
T
H
O
S
T
6
3
1
2
4
7
5
Hardware Configuration
Caution: Be sure that all cables are connected BEFORE applying power to the
system. Always power down BEFORE disconnecting any cables.