Microscan Quadrus EZ, User Manual, Page: 300 / 366

15-6
Quadrus EZ Reader User’s Manual
Using DHCP to Configure the Reader
This assumes that the Quadrus EZ is connected to a network on which resides a DHCP
server. RS-232 configuration is required to enable the reader's DHCP client (default “IP
address mode” setting is “static”, which disables DHCP).
1. Do Receive Reader Settings .
2. Under Network in the ESP Commu-
nications menu, double click on IP
Address Mode and change Static to
DHCP .
3. Right click on the Communications
menu and do Save to Reader/Send
no Save .
4. Do Receive Reader Settings .
5. Notice that the network will have assigned new numbers to the IP Address, Subnet,
and Gateway, as shown here:
(If the numbers have not changed, contact your IS department.)
6. Go to Step 3, Communicating in Ethernet.