Microscan Quadrus EZ, User Manual, Page: 269 / 366

Quadrus EZ Reader User’s Manual
12-17
Utilities
Defaulting/Saving/Resetting
Understanding and controlling your reader’s active, saved, and default settings is critical to
the operation of your reader.
Software Reset/Save/Recall Commands
Resets
Resets (“ A ” commands) affect only the current settings (active memory) and are not saved
for power-on.
Saved for Power-on
Power-on parameters (“ Z ” commands) are saved to NOVRAM and recalled and loaded
into current parameters when power is cycled or the <Arp> command is issued.
Defaults
Defaults are Microscan firmware settings or saved customer settings that can be recalled,
either by software or hardware reset.
Function
Serial
Cmd
ESP (first, right click in
any menu tree)
a
a. When you right click in a menu tree and select Default Current Menu Settings or Default All ESP
Settings , it is important to note that only ESP settings are defaulted. To save these defaults to the
reader itself, you need to follow up with a <Z> or Save to Reader , Send and Save command.
EZ Button
R
e
s
e
ts
(n
o
t
s
a
v
e
d
fo
r
p
o
w
e
r-
o
n
)
Reset <A>
Save to Reader,
Send No Save
No
Reset and recall Microscan
defaults
<Ard> No No
Reset and recall power-on
parameters
<Arp> No No
Reset and recall customer
default parameters
<Arc> No No
S
a
v
e
d
f
o
r
P
o
w
e
r-
o
n
Save current settings for power-
on
<Z>
Save to Reader,
Send and Save
No
Save current settings as cus-
tomer default parameters
<Zc>
Save to Reader,
Send and Save Cus-
tomer Defaults
b
b. Only available in ESP if enabled under the Options pulldown menu.
No
Recall Microscan default param-
eters and save for power-on
<Zrd> No No
Recall customer default parame-
ters and save for power-on
<Zrc> No
Press and hold
while powering on
reader