Microscan Quadrus EZ, User Manual, Page: 154 / 366

5-38
Quadrus EZ Reader User’s Manual
Input 1
Input 1
Disabled
Reset Counts
Unlatch Output
Active State (Input)
Usage:
For example, an application is setup so that a mismatch stops the production
line by using outputs in a latch mode. A push button switch can be connected
to the input pin so that when pressed, it unlatches the output, allowing the
line to resume operations.
Definition:
A programmable, discrete input used to reset counters, outputs or control
optoelectrical settings.
Serial Cmd:
<
K730,input mode ,active state>
Default: Disabled
Options: 0 = Disabled 1 = Reset Counts 2 = Unlatch Output
Definition: When set to Disabled there is no effect on operation.
Usage: Primarily used in test mode. Can also be used to reset counters daily.
Definition:
When set to Reset Counts, a transition to the active state of the input will
cause the reader to reset the internal counters.
Definition:
This setting is used in combination with any of the three discrete outputs
that are in Unlatch Mode 1. A transition to the active state will clear any of
the three outputs that were previously latched.
Definition: Sets the active level of the input pin.
Serial Cmd:
<
K730, input mode, active state >
Default: Active Off
Options:
0 = Active On (same as active closed)
1 = Active Off (same as active open)