Microscan Quadrus EZ, User Manual, Page: 314 / 366

A-10
Quadrus EZ Reader User’s Manual
Connectivity Accessories
Appendix E — Connectivity Accessories
Three interface options are available for Quadrus EZ connectivity.
IB-150 Kit
The IB-150 interface links the Quadrus EZ to the host, power supply, trigger, and aux port
connections. In addition to multidrop and daisy chain hookups, the aux port can plug into
the IB-152 interface for terminal strip wiring.
Q
U
A
D
R
U
S
E
Z
™
R
E
A
D
E
R
T
R
IG
G
E
R
P
O
W
E
R
AUX PO RT
HO ST
IB
-1
5
0
In
te
rfa
c
e
Quadrus EZ
IB-150
Quadrus EZ Cable
Trigger 4-pin Connector
Power 3-pin Connector
Note: The IB-151 should be used whe
establishing an Ethernet connection.
Pin Function
1 Power + 10 to 28VDC (out)
a
a. For NPN type, connect pins 1 and 4.
2 Trigger (–) (in)
b
b. For PNP type, connect pins 2 and 3.
3 Power Ground
4 Trigger (+) (in)a
Pin Function
1 Power Ground
2 Chassis Ground
3 Power + 10 to 28VDC (in)
IB-150 Port Connectors
Pin
Reader Host Aux Port
1 Chassis ground Chassis ground Chassis ground
2 TxD TxD RxD
3 RxD RxD TxD
4 RTS/Aux TxD RTS/Aux TxD NC
5 CTS/Aux RxD CTS/Aux RxD NC
6 Output 1 (+) Output 1 (+) Output 1 (+)
7 Signal GND Signal GND Signal GND
8 Output 2 (+) Output 2 (+) Output 2 (+)
9 Trigger (–) Trigger (–) Trigger (–)
10 Trigger (+) Trigger (+) Trigger (+)
11 Default Default Default
12 Input 1 (+) Input 1 (+) Input 1 (+)
13 RxD (+) RxD (+) RxD (+)
14 TxD (–) TxD (–) TxD (–)
15 Output 3 (+) Output 3 (+) Output 3 (+)
16 RxD (–) RxD (–) RxD (–)
17 Power ground NC Power ground
18 +10 to 28 VDC NC +10 to 28VDC
19 TxD (+) TxD (+) TxD (+)
20 Output 1 (–) Output 1 (–) Output 1 (–)
21 Output 2 (–) Output 2 (–) Output 2 (–)
22 Output 3 (–) Output 3 (–) Output 3 (–)
23 Input 1 (–) Input 1 (–) Input 1 (–)
24 New master (–) New master (–) New master (–)
25 New master (+) New master (+) New master (+)