Microscan Quadrus EZ, User Manual, Page: 284 / 366

14-4
Quadrus EZ Reader User’s Manual
Format Assign
Format Assign
Symbol Number
Status
By ESP
Definition: Symbol Number refers to the number of the symbol to which output formatting
will apply. For example, if you wish to enable user-defined formatting to
symbol # 2 in a multisymbol read cycle, you would send the command
<K742,2,1> . Note that the number of symbols may exceed the format
capabilities.
Serial Cmd: < K742 , symbol number ,status>
Options: 1 to 10
1 = Formatted output status for symbol # 1.
2 = Formatted output status for symbol # 2.
...
10 = Formatted output status for symbol # 10.
Definition: Status refers to the user-defined formatting of a selected symbol position in
the read cycle result. Note that there is also a global formatting “enable”
command that must be set for the formatting to be applied.
Serial Cmd: < K742 ,symbol number, status >
Default: Disabled
Options: 0 = Disabled 1 = Enabled (Assign parameters to specified symbol.)
Use the Set Number of Symbols spin box to
determine the number of symbols to be included in
the output phrase.
Then check the Parse boxes
beneath the symbols that you wish to
format for user-defined output.