Microscan Quadrus EZ, User Manual, Page: 319 / 366

Quadrus EZ Reader User’s Manual
A-15
Appendices
2D Symbology
Qualification
< K718 , finder pattern status,symbol size mode,symbol size
1,symbol size 2,symbol size tolerance,dimension mode,dimen-
sion 1,dimension 2,dimension tolerance,orientation mode,orien-
tation value>
Read Duration Output < K706, status,separator>
LED Indicators < K750, green flash mode,x-pattern status,green flash duration>
Beeper < K702, beeper status>
LED Configuration < K737, LED mode,ISO/IEC 15415 grade,DPM grade>
Serial Verification
< K701, serial command echo status,serial command beep sta-
tus,control/hex output>
Video Output < K760, video output mode,trigger image mode,image frame>
Image Output < K739, image output mode,comm port,file format,JPEQ quality>
Image Captioning < K762, mode>
Synchronous Trigger < K761, synchronous trigger mode>
EZ Button
< K770, global status,default on power-on,load IP database,save
for power-on >
EZ Button Modes
< K771, position 1 mode,position 2 mode,position 3 mode,posi-
tion 4 mode>
Input 1 < K730, input mode,active state>
Output 1 Parameters < K810, output on,active state,pulse width,output mode>
Trend Analysis Output 1
< K780, trend analysis mode,number of triggers,number to out-
put on>
Symbol Quality (ISO/IEC
15415) to Output 1
< K800, output on symbol contrast,symbol contrast thresh-
old,output on print growth,print growth threshold,output on axial
non-uniformity,axial non-uniformity threshold,output on unused
ecc,unused ecc threshold>
Symbol Quality (Inkjet/
Direct)
to Output 1 < K820, output on dot center offset,dot center offset,output on
cell fill,cell fill,output on dot ovality,dot ovality threshold,output
on angle of distortion,angle of distortion threshold>
Diagnostic Warnings
to Output 1
< K790, over temp,service unit,external camera disconnect>
Output 2 < K811, output on,active state,pulse width,output mode>
Trend Analysis Output 2
< K781, trend analysis mode,trigger evaluation period,number to
output on>
Symbol Quality (ISO/IEC
15415) to Output 2
< K801, output on symbol contrast,symbol contrast thresh-
old,output on print growth,print growth threshold,output on axial
non-uniformity,axial non-uniformity threshold,output on unused
ecc,unused ecc threshold>
Symbol Quality (Inkjet/
Direct)
to Output 2 < K821, output on dot center offset,dot center offset,output on
cell fill,cell fill,output on dot ovality,dot ovality threshold,output
on angle of distortion,angle of distortion threshold>
Diagnostic Warnings
to Output 2
< K791, over temp,service unit,external camera disconnect>