Microscan Quadrus EZ, User Manual, Page: 258 / 366

12-6
Quadrus EZ Reader User’s Manual
Device Control
Device Control
By ESP
Device Control By Serial Command
Output #1 Pulse
Sending <L1> pulses activates the link between Output 1(+) and Output 1(–) of the host
connector (regardless of Master Symbol or Output 1 status).
Output #2 Pulse
Sending <L2> pulses activates the link between Output 2(+) and Output 2(–) of the host
connector (regardless of Master Symbol or Output 2 status).
Output #3 Pulse
Sending <L3> activates the link between Output 3(+) and Output 3(–) of the host connector
(regardless of Master Symbol or Output 3 status).
Disable Reader
Sending <I> will turn the reader OFF, end the current read cycle and not allow the reader
to enter a read cycle until turned ON. This feature is useful during extended periods of
time when no symbols are being scanned or the reader is being configured. Disabling the
reader will not affect any downloaded commands to the reader.
Enable Reader
Sending <H> will turn the reader ON and allow it to enter read cycles.