A-32
Quadrus EZ Reader User’s Manual
Embedded Menus
Appendix N — Embedded Menus
In addition to ESP, you can also use a communications menu such as HyperTerminal to
establish communication with Microscan’s embedded menus.
1
1. With your host connected to the Quadrus EZ, set your host communications settings as
follows:
115.2K
baud,
8
Data Bits,
1
Stop Bits, and
None
Parity.
2. Set Flow Control to
None
.
3. Make the communications port selection. (Usually
COM 1
for Windows OS.)
Upon connection, send a
<D>
command to bring up the main menu.
Menu navigation commands are case sensitive. Use the space bar or
N
to advance to the
next item,
CR
(return key) to select a highlighted item,
B
to return to the previous item,
M
to return to the previous menu, and
ESC
to return to the Main menu or to exit the program.
When exiting the program, you will be prompted to save your active settings for power up
(
Y
or
N
). Typing
Y
will be equivalent to saving with a
<Z>
command.
1. If you are using HyperTerminal, you may find that the initial screen is not visible when you call up the program
with the
<D>
command. If this occurs, exit the embedded menu with an
ESC
,
E
, and
N
sequence and repeat
the
<D>
command.
Summary of Contents for Quadrus EZ
