Microscan Quadrus EZ, User Manual, Page: 166 / 366

5-50
Quadrus EZ Reader User’s Manual
Output 1 Parameters
Cell Fill
Dot Ovality Threshold
Angle of Distortion Threshold
Definition:
This adopts the ISO/IEC 15415 letter grades to be compared against to
determine whether or not to assert the output. The <=2% (Grade A) is from
Aerospace Direct Part Marking Standard Spec.
Serial Cmd:
< K820, output on dot center offset,dot center offset,output on cell fill, cell
fill ,output on dot ovality,dot ovality threshold,output on angle of distor-
tion,angle of distortion threshold>
Default: Grade B (>2-5%)
Options:
0 = Grade A (0-2%) 1 = Grade B (>2-5%)
2 = Grade C (>5-10%) 3 = Grade D (>10%)
Definition:
This adopts the ISO/IEC 15415 letter grades to be compared against to
determine whether or not to assert the output. The <=2% (Grade A) is from
Aerospace Direct Part Marking Standard Spec. This has no effect when the
dot is specified as a square.
Serial Cmd:
< K820, output on dot center offset,dot center offset,output on cell fill,cell
fill,output on dot ovality, dot ovality threshold ,output on angle of distor-
tion,angle of distortion threshold>
Default: Grade B (>2-5%)
Options:
0 = Grade A (0-2%) 1 = Grade B (>2-5%)
2 = Grade C (>5-10%) 3 = Grade D (>10%)
Definition:
This adopts the ISO/IEC 15415 letter grades to be compared against to
determine whether or not to assert the output. The <=3.5 degree (Grade A)
and >3.5 to 7 degree (Grade B) are from Aerospace Direct Part Marking
Standard Spec.
Serial Cmd:
< K820, output on dot center offset,dot center offset,output on cell fill,cell
fill,output on dot ovality,dot ovality threshold,output on angle of distor-
tion,
angle of distortion threshold >
Default: Grade C (>7-10.5)
Options:
0 = Grade A (0-3.5 degree) 1 = Grade B (>3.5-7)
2 = Grade C (>7-10.5) 3 = Grade D (>10.5-14)