Microscan Quadrus EZ, User Manual, Page: 262 / 366

12-10
Quadrus EZ Reader User’s Manual
Master Database
Request Master Symbol Data
Request All Master Symbol Data
Read Next Symbol as Master Symbol
Definition:
Returns master symbol data for any enabled master symbols from 1 to 10.
For example, to request master symbol #5, enter <K231?,5> . The reader
transmits master symbol #5 data in brackets in the following format: <5/
data>.
If no master symbol data is available, the output will be: <5/>.
Serial Cmd: < K231?,master symbol number >
Caution: Be sure to add the ? or you will delete the master symbol.
Returns the number of master symbols if no number is included.
ESP:
1. Click the Utilities button and the Master Database tab.
2. Click on the Receive Reader’s Database button.
Serial Cmd:
< K231? >
This command will return master symbol data for all symbols enabled
(up to 10).
Definition:
After you’ve set the size in the database, you can order the reader to read
the next symbol as the master symbol for any given master symbol number.
Serial Cmd:
< G master symbol number >
To store the next symbol read as master symbol #1, send:
<G> or <G1> .
To store next symbol read as the master symbol for any other master symbol
database number, send:
<G master symbol number [1-10]> .
For example, <G5> will cause the next symbol read to be entered as master
symbol #5.
ESP: In the Master Database tab, under the Output Format menu
1. Select the master symbol index number in which you want to store the
symbol data.
2. Click on Read Symbol into Selected Index .
Caution: If you’ve selected an index which has existing data, that data will
be copied over by scanned data when you use this command.