Microscan Quadrus EZ, User Manual, Page: 152 / 366

5-36
Quadrus EZ Reader User’s Manual
EZ Button
Disabled
When set to disabled, the associated button position will have no function associated with
it, and the position will be skipped over.
Read Rate
Read rate will be initiated when the associated button position is selected. Read rate will
perform decodes/second and is the same as sending a
<C> from the terminal. To exit read
rate mode quickly press and release the EZ Button.
Calibrate
Calibration will be initiated when the associated button position is selected. To abort calibration,
quickly press and release the EZ Button.
Save for Power On
All reader settings will be saved to non-volatile memory to be recalled on power-on
whenever the associated button position is selected. This is the same as sending the
<Z>
in the terminal.
Load New Master
Functions the same as new master pin input whenever the associated button position is selected.
The new master pin’s Consecutive Decode requirement holds true for this function.
Target system
Turns on the targeting system (X pattern) whenever the associated button position is
selected. To disable, quickly press and release the EZ Button.
Note: This mode is the only one that does not require that the button be released before
taking effect. Thus, as soon as the scanner beeps the appropriate number of times for the
position, it will take effect. If it is necessary to have the target system on before another
operation such as calibration or read rate is performed, ensure that the target system
mode is assigned a lower position so that it will be activated first.
Live Video
Enables live video mode when the associated button position is selected. To disable,
quickly press and release the EZ Button.
Important Note: If the user has a non-video unit and this mode is selected, it will behave
the same as if the mode was disabled.
Bar Code Configuration
Enables bar code configuration mode whenever the associated button position is selected.
When enabled the reader can accept configuration commands from bar codes without first
reading a special, coded Data Matrix ISO/IEC 15415 symbol. To disable, quickly press and
release the EZ Button.