Microscan Quadrus EZ, User Manual, Page: 185 / 366

Quadrus EZ Reader User’s Manual
6-13
Symbol Quality
Static Symbol Quality Outputs
When in a static capture mode, you can send a serial command immediately following a
triggered output to see all of the symbol quality outputs.
Note: This command does not function in dynamic captures.
In the following screen captures, all the symbol quality parameters are “forced;” that is,
they are displayed although not individually enabled. When you enable parameters individually,
either through the
<K707...> command or through ESP, the symbol quality results will be
appended to the end of the symbol data.
Static ISO/IEC 15415/Grading Symbol Quality Output <VAL>
If the reader decoded a data matrix symbol in its last read cycle, sending a <VAL> serial
command will return a report that includes ISO/IEC 15415 and Grading Symbol Quality
parameters and symbol data.
Static Inkjet/Direct Symbol Quality Output <VAL2>
If the reader decoded a data matrix symbol in its last read cycle, sending a <VAL2> serial
command will return a report that includes Inkjet/Direct symbol quality parameters and
symbol data.