Microscan Quadrus EZ, User Manual, Page: 276 / 366

13-4
Quadrus EZ Reader User’s Manual
UII Mode Features
UII Mode Features
UII Mode by ESP
UII-Only Enabled Allows the Quadrus EZ to read only UII message streams
encoded in ECC 200 Data Matrix symbols and to send the UII
output to the host computer. The Quadrus EZ will not read any
other symbol data when UII-Only is enabled.
UII-Only Enabled with
Error Messaging
Allows the Quadrus EZ to read only UII message streams
encoded in ECC 200 Data Matrix symbols and to send the UII
output to the host computer. In addition, the Quadrus EZ will
send an error message to the host if the UII message stream
is invalid.
UII Enabled with Pass
Through
Allows both UII-encoded symbols and non-UII symbols to be
decoded and sent to the host.
UII Enabled with Error
Messaging and Pass
Through
Allows the Quadrus EZ to decode UII symbols and non-UII
symbols, and to provide error messages if the UII message
stream is invalid.
Click this button to
bring up the I/O
Parameters menu.
Open the nested Unique
Item Identifier option in
the I/O Parameters tree
control.
To change settings, double-click the setting and use your cursor
to scroll through the options.
Note: The setting Enabled in ESP’s UII tree controls is functionally identical to UII Enabled with Pass Through
in the table at the top of this page. Therefore, the combination of UII Enabled and Error Message Enabled is
functionally identical to the UII Enabled with Error Messaging and Pass Through condition in the table at the
top of the page.