Microscan Quadrus EZ, User Manual, Page: 26 / 366

1-14
Quadrus EZ Reader User’s Manual
Make Menu Changes and Save in ESP
Video Output Option
You can connect a remote video monitor (RS-170/monochrome, non-interlaced) via the
video output port on the back of the Quadrus EZ Reader and view live video or triggered
events such as a good read, no read, or slide show of on-going captures.
To Enable Live Video:
Press and hold the EZ button until you hear a series of 4 beeps.
Note for CCD readers: When Live video mode is active, in order to synchronize with the
video format, a shutter time of 1/1000 is the lowest shutter speed setting that can be
applied to the camera settings. Slower shutter speeds will disable the video output.
When connected to a remote video with Live video mode active, the monitor screen is a
close representation of the FOV. This allows you to visually verify that a symbol is within
the FOV and the X-pattern is centered over it.
Note: During normal read cycle operations, the X-pattern will not be present unless
enabled by
<K750,,1> or by ESP.
Video Input Option
You can connect an external camera (RS-170/monochrome non-interlaced, progressive
format, 512 lines, 30 fps) for streaming captures into the Quadrus EZ Reader.
Note: Power to an external camera is not supplied by the Quadrus EZ Reader.
Video
Output
Video
Input