Microscan Quadrus EZ, User Manual, Page: 151 / 366

Quadrus EZ Reader User’s Manual
5-35
I/O Parameters
Load IP Database (EZ Button)
Save for Power-On (EZ Button)
EZ Button Modes
Definition:
Allows the user to load the IP database with calibration results. When the
user performs a calibration using the EZ button, all the database entries
are moved down one index and the results of the calibration are saved to
index 0. Note the results will saved as current settings as well.
Serial Cmd:
< K770, global status,default on power-on ,load IP database ,save for power-
on>
Default: Enabled
Options: 0 = Disabled 1 = Enabled
Definition:
If enabled, after calibration is complete, all parameters will saved for
power-on.
Serial Cmd:
< K770, global status,default on power-on,load ip database, save for power-
on >
Default: Disabled
Options: 0 = Disabled 1 = Enabled
Usage: Useful for performing multiple, repetitive tasks at the work site.
Definition:
Allows user to program each of EZ button’s 4 positions from a selection of 8
modes.
Serial Cmd: < K771, position 1 mode,position 2 mode,position 3 mode,position 4 mode>
Options: 0 = Disabled 1 = Enabled
Single Beep Two Beeps Three Beeps Four Beeps
0 = Disabled 0 = Disabled 0 = Disabled 0 = Disabled
1 = Read rate 1 = Read rate 1 = Read rate 1 = Read rate
2 = Calibrate 2 = Calibrate 2 = Calibrate 2 = Calibrate
3 = Save for power on 3 = Save for power on 3 = Save for power on 3 = Save for power on
4 = Unused 4 = Unused 4 = Unused 4 = Unused
5 = Load new master 5 = Load new master 5 = Load new master 5 = Load new master
6 = Unused 6 = Unused 6 = Unused 6 = Unused
7 = Target system 7 = Target system 7 = Target system 7 = Target system
8 = Live Video 8 = Live Video 8 = Live Video 8 = Live Video
9 = Bar Code Config. 9 = Bar Code Config. 9 = Bar Code Config. 9 = Bar Code Config.