MI 3321 MultiservicerXA
Single tests in PAT testing mode
47
6 Single tests in PAT testing mode
In the single test mode two sets of individual tests can be performed:
- Single tests for appliances,
- Single tests for welding machines.
This is especially helpful for troubleshooting.
Notes:
Single test results cannot be saved in PAT testing operating mode.
For testing 3-phase appliances or welding machines the 3-phase operation mode
must be enabled and the MultiservicerXA must be connected to a Metrel 3-phase
adapter:
- A1322
– for 3-phase appliances,
- A1422
– for 3-phase appliances and single phase or 3-phase welding machines.
6.1 Performing measurements in single test mode
Select
Single test
in
PAT testing main menu
by using
and
keys and press
ENTER
key to confirm. The
Single test menu
is displayed.
Single test menu
– portable appliances
Single test menu
– welding machines
Press (F4)
WELDING
or
APPL.
to switch between the two sets of single tests (if
applicable).
In
Single test menu
select single test by using
and
keys and press
ENTER
key to
confirm.
Editing test parameters
Test measurement parameters of the selected single test are displayed in the top right
corner of the display.
They can be edited by pressing the
EDIT
(F1) button and selected with by
and
keys
The selected parameter is highlighted. Its value can be set by using
and
keys.
Note:
To keep new settings, press
SAVE
(F1) key.
