MI 3321 MultiservicerXA
Working with results
– all operating modes
174
/
,
Alphanumeric
Edits parameter line.
FIND
(F1)
Starts search after filters are setup correctly.
UNDO
(F2)
Undoes latest change.
TYPE
(F3)
Selects type of parameter line.
ESC
Returns to Main menu.
Notes:
Project parameter line:
If a project number is selected all other set filters will be ignored. If »*« is set in the
Project filter other set filters will be active.
All parameter lines except Project:
To change the selected filter line type, press the F3 function key and the »filter type«
will become highlighted (e.g. DEVICE). The
and
cursor keys can then be used
to change the filter type and by pressing ENTER key the choice can be confirmed.
Once the filter types have been set up, the data required to filter the files can be
inserted. Filter information can be inserted via the alphanumeric keypad or, in some
filter fields such as user, can also be selected from a predefined list by pressing the
F4 function key. The device number field can also be read using a barcode reader.
By placing a »*« (shift + “2”) in a particular field, tells the instrument not to search
the associated filter field. When searching, the instrument will therefore ignore data
in this parameter and go on to find all the devices that conform to data placed in
the other filter fields.
To find all stored results, enter »*« in the all fields (excluding DATE where the
correct from and to dates must be entered).
When the search filters have been correctly set up, a search can be performed by
pressing the F1 function key. If the search filters are set up correctly and the devices
exist in the units memory, the
Recall results menu
will be displayed.
While recalling stored results, the instrument shows a bar graph and a ratio of files
found compared to files stored in memory (e.g. 7/11 implies 7 results have been found
to meet the filter criteria out of a potential 11 results stored in the flash memory).
Recall project menu
Once the Projects have been found, the
and
keys and
PgUp
(F1) and
PgDown
(F2) keys can be used to scroll through the filtered list of Projects.
More information relating to the selected Project can be viewed by pressing the
ENTER
key on the appropriate Project. It can be scrolled through test results by using the
PgUp
(F1) and
PgDown
(F2) keys. The
MORE
(F5) key can be used to view additional
Project data.
