MI 3321 MultiservicerXA
PAT testing operating mode
42
5 PAT testing operating mode
The PAT testing operating mode is primarily intended for periodic testing and
maintenance of portable electrical appliances/devices and welding machines. The
instrument can test devices in the following modes:
- Single test mode,
- Several autotest modes.
After the instrument is switched on, the last menu used will be displayed.
Note:
For testing 3-phases appliances and/or welding machines the 3-phase operation
mode must be enabled and the MultiservicerXA must be connected to a Metrel
A1322 or A1422 3-phase Active GT / Machine adapter (Plus).
5.1 PAT testing main menu
From the
PAT testing main menu
all instrument functions relevant for PAT testing can
be selected.
PAT testing main menu
Select the function you want to perform by using
and
keys and press ENTER key
to confirm. To return to the previous menu press
the ESC key.
5.2 VDE organizer menu
This menu offers creation and performing of VDE compatible test sequences. The
sequence setup and its parameters are exactly the same as suggested in the VDE
0701-0702 standard.
When an autotest sequence has been created in the VDE organizer, it can be run as an
autotest or stored in the Custom Autotest menu.
VDE organizer menu
