MI 3321 MultiservicerXA
Autotest sequences
100
7.6.6
Insulation resistance (supply circuit of class II equipment to
accessible surfaces)
Measurement is described in chapter
6.3.5 Insulation resistance (supply circuit of class
II equipment to accessible surfaces)
. If this insulation test fails or was skipped other
tests will not be carried out because of safety.
Keys:
START
Starts the insulation resistance measurement.
Proceeds with the next insulation resistance measurement
(in continuous mode).
Proceeds to the next autotest sequence measurement (in single
measurement mode only).
ENTER
Proceeds to the next autotest sequence measurement (in continuous
measurement mode only).
HELP (F2)
Displays the insulation resistance test help screens.
REPEAT (F3)
Repeats the insulation resistance measurement.
SKIP (F4)
Skips insulation resistance measurement.
END (F5)
Ends the autotest sequence.
7.6.7
Welding circuit leakage current
Measurement is described in chapter
6.3.6 Welding circuit leakage current
. If this
leakage test fails or was skipped other tests will not be carried out because of safety.
Keys:
START
Starts the leakage current measurement.
Proceeds with the next leakage current measurement
(in continuous mode).
Proceeds to the next autotest sequence measurement (in single
measurement mode only).
ENTER
Proceeds to the next autotest sequence measurement (in continuous
measurement mode only).
CHG ON (F1)
The instrument automatically changes L and N polarity of connected
welding equipment during the test (suitable for 1-phase equipment
with schuko plug). Higher measured current will be considered.
CHG OFF (F1)
Disables the automatic change of polarity function.
HELP (F2)
Displays the leakage current test help screens.
REPEAT (F3)
Repeats the leakage current measurement.
SKIP (F4)
Skips the leakage current measurement.
END (F5)
Ends the autotest sequence.
7.6.8
Primary leakage current
Measurement is described in chapter
6.3.7 Primary leakage current
. If this leakage test
fails or was skipped other tests will not be carried out because of safety.
Keys:
