LS ELECTRIC SV-iS7 Series, User Manual

Page: 334 / 491

M
oni
to
r
Func
tio
ns
317
Using Monitor Functions
Code Description
10
Over
Voltage Outputs a signal when the inverter DC link voltage rises
above the protective operation voltage.
11 Low Voltage Outputs a signal when the inverter DC link voltage drops
below the low voltage protective level.
12 Over Heat Outputs signal when the inverter overheats.
13
Lost
Command
Outputs a signal when there is a loss of analog input
terminal and RS-485 communication command at the
terminal block.
Outputs a signal when communication power is present
and an I/O expansion module is installed. It also outputs a
signal when losing analog input and communication
power commands.
14 RUN
Outputs a signal when an operation command is entered
and the inverter outputs voltage.
No signal output during DC braking.
15 Stop
Outputs a signal at operation command off, and when
there is no inverter output voltage.
16 Steady Outputs a signal in steady operation.
17 Inverter Line
Outputs a signal while the motor is driven by the inverter
line.
18 Comm Line
Outputs a signal when multi-function input terminal
(switching) is entered.
Group Code LCD Display Initial Setting Unit
IN 65-72 Px Define 16 Exchange -
OUT 32 Relay 2 15 Inverter Line -
33 Q1 Define 16 Comm Line -
For details, refer to
8.23 Supply Power Transition on page
260 .
19
Speed
Search
Outputs a signal during inverter speed search operation.
For details, refer to
8.19 Speed Search Operation on page
250 .
20 Step Pulse
Outputs a signal when a step is completed in an auto
sequence operation.