LS ELECTRIC SV-iS7 Series, User Manual

Page: 281 / 491

Learning Advanced Features
264
8.28 Parameter Initialization
User changes to parameters can be initialized (reset) to factory default settings on all or
selected groups. Parameters cannot be reset during operation or a fault trip condition.
Group Code Name LCD Display Parameter Setting Setting Range Unit
CNF 40
Parameter
initialization
Parameter Init 0 No 0 – 15
Parameter Initialization Setting Details
Code Description
CNF-40 Parameter
Init
Setting LCD Display Function
0 No No -
1 Initialize all groups All Grp
Initialize all data. Select “1 (All
Grp)” and press the
[PROG/ENT] key to start
initialization. On completion, “0
(No)” will be displayed.
2 Initialize DRV group DRV Grp
Initialize data by groups. Select
Initialize group and press the
[PROG/ENT] key to start
initialization. On completion, “0
(No)” will be displayed.
3 Initialize BAS group BAS Grp
4 Initialize ADV group ADV Grp
5 Initialize CON group CON Grp
6 Initialize IN group IN Grp
7 Initialize OUT group OUT Grp
Caution
When utilizing the optional communication module, note the following information if
you need to read or write the parameter values set at COM-10
–25 (Opt Parameter).
1. Because the “Opt Parameter” (COM-10–25) values are stored in the optional add-on
modul
e, you must run “Comm Update” (COM-94) to apply the changes after making
changes to the parameter settings.
2. You must save the parameter values set at COM-10
–25 (Opt Parameter) by running
“Parameter Save” before you can read or write the “Opt Parameter” parameters.