LS ELECTRIC SV-iS7 Series, User Manual

Page: 286 / 491

Learning Advanced Features
Adv
anc
ed
Feat
ur
es
269
Code Description
Follow the procedures below to register parameters to a user group.
No Procedure
1
Set CNF- 42 to “3 (UserGrp SelKey)”. The icon will be displayed
at the top of the LCD display.
2
In the parameter mode (PAR Mode), move to the parameter you
need to register and press the [MULTI] key. For example, if the
[MULTI] key is pressed in the frequency reference in DRV-01 (Cmd
Frequency), the screen below will be displayed.
❶
Group name and code number of the parameter.
❷
Name of the parameter.
❸
Code number to be used in the user group. Pressing the
[PROG/ENT] key on the code number (40 Code) will register DRV-01
as code 40 in the user group.
❹
Existing parameter registered as the user group code 40.
❺
Setting range of the user group code. Entering “0” cancels the
settings.
3
❸
Set a code number to use to register the parameter in the user
group. Select the code number and press the [PROG/ENT] key.
4
Changing the value in
❸
will also change the value in
❹
. If no
code is registered, “Empty Code” will be displayed. Entering “0”
cancels the settings.
5
The registered parameters are listed in the user group in U&M
mode. You can register one parameter multiple times if necessary.
For example, a parameter can be registered as code 2, code 11, etc.
in the user group.
Follow the procedures below to delete parameters in the user group.
No. Settings
1
Set CNF- 42 to “3 (UserGrp SelKey)”. The icon will be displayed
at the top of the LCD display.