Group 5
Transport/start up
Page 32
Release 3.00
Leibinger-Jet 2 se
5. Transport/Start up
(Putting into service)
5.1 Transport, storage,
shipping
In order to avoid damage during transport the following instructions must be observed.
The LEIBINGER-JET 2 must only be transported in a standing position. It is packed in a
cardboard box with special polystyrene inserts for safe dispatch during delivery. Transport of
the device must only be made in this packing in order to avoid damage.
Note!
Storage temperatures below +5°C and above +50°C as well as storage at outside are
not admissible and can lead to damage!
5.2 Mounting
Caution – risk of explosion!
The device must not be operated in rooms where there is a risk of
explosion!
Installation of the device
The device must be installed in a well ventilated room only and must
be kept away from any source of heat, flame or sparks, e.g. radiant
heater, etc.
Check device for damage! When determining a suitable place of setting up, the necessary
additional space requirement for the movement room of the operating and service personnel
must be taken into consideration. Solvents are processed in the device, adequate room
ventilation must be ensured!
Figure 4
Movable underframe
for LEIBINGER-JET 2:
54-002 601 KA
For this it is expedient to place the device on a device support.
weldment seam
