Group 6
Operation – procedures and elements
Page 48
Release 3.00
Leibinger-Jet 2 se
Figure 15
The touch field
<request>
(5) calls up the
basis level
<E1>
.
The device can be switched off with the
touch field
<off>
(6).
Unintentional touching can trigger undesired device conditions.
After switching off approx. 5 seconds must pass before the device
can be switched on again.
Figure 16
The following functions and displays are
available in the basic level.
The touch field
<main menue>
(7) opens
the programming level
<E2>
for the
selection of print jobs etc.. More detailed
information on this subject can be found in
the group
Data entry
.
In the touch field
<product counter>
(8)
the current values of the product counter
are displayed. The counter can be reseted
by pressing on this field (8).
<Power off>
(9) leads back to the level
<E0>
. Switching off of the device is only
possible after carrying out of a print stop
and with the nozzle closed.
With the touch field
<printstart>
(10) the print order is released for performance. It is
printed as soon as a Print Go is triggered. When a print procedure is running the display
of the field changes to
<printstop>
. To be able to perform a print order a text must have
been entered or an existing job selected. Further information on this subject can be
found in the group
Data entry
in the chapters
Text administration and job
administration!
5
[E0]
6
4
7
12
[E1]
11
8
10
9
