manualshive.com logo in svg

Leibinger Jet 2, Manual, Page: 49 / 178

Share
Download
Leibinger Jet 2 Manual Download Page 49

Group 6 

Operation – procedures and elements 

Page 49 

Release 3.00 

 

Leibinger-Jet 2 se 

 
 

The display (11) shows the name of the active job. The text to be printed is shown in the 
field (12). The display of the text shown is updated when printing is started (e.g. when 
printing counters). 

 
 
 

6.3.1.2 Interval operation 

 

 
 

 

The device must be connected to the electricity mains. 
 
The device switches itself on automatically independently of the 
ambient conditions! 

 

 

 

 
 
 
 
 
 
 
 
 

 

 

 

In the switched off state the integrated interval function activates the LEIBINGER-JET 2 
automatically in accordance with the times set in the menu level 

<E43>

 (“Main menu 

!

 

service/test/ system parameter 

!

 service/test & diagnostics 

!

 hydraulic test & 

parameter 

!

 service menu“). 

 
By means of the circulation of the ink it is ensured that in cases of extended idle periods 
no drying of the ink or depositing of ink constituents results. The viscosity of the ink 
remains constant. 
 
Further information about the entry of the interval times can be found in the chapter 

Hydraulic test and parameters!

 

 
 

 

[E43]

Summary of Contents for Jet 2



















































































































































































Reviews:

No comments