Leibinger Jet 2 Manual Download Page 120

Page: 120 / 178

Group 7

Data Entry

Page 120

Release 3.00

Leibinger-Jet 2 se

7.7.6.4 Software information

Figure 97

The touch field

<software information>

(178) displays the software statuses and the

operating hours counter (179).

7.7.6.5 Permanent bleeding

Figure 98

The

touch

field

<const. bleed>

(180) starts the permanent bleed of the device. The

status field (181) blinks during the procedure and the notification

“Bleed”

is displayed.

The bleeding can be cancelled at any time by pressing on the touch field

<ESCAPE>

(182). During this process the visco pump will be activated for 3 sec. every minute to
guarantee that the pump will be flushed.

The function permanent bleed can be only activated if the device
is working under the following conditions:

the ink supply is switched on

the head cover has been removed.

[E34]

181

[E16]

180

182

[E35]

179

178

[E16]

Summary of Contents for Jet 2



















































































































































































Search results

Summary of Contents for Jet 2

Reviews:

Leibinger Jet 2, Manual, Page: 120 / 178

Search results

Summary of Contents for Jet 2

Reviews: