Group 2
Safety instructions
Page 22
Release 3.00
Leibinger-Jet 2 se
2.6 Operating staff
Only trained personnel must operate the device. The personnel must have appropriate
training to enable them to be able to operate the LEIBINGER-JET 2 high performance printer
professionally.
Within the working area of the LEIBINGER-JET 2 device the operator is responsible with
regard to third parties.
The operator must
!
put this operating manual at the operating staff’s disposal and
!
make sure that they have read and understood them.
2.7 Dangers due to electric energy
The electrical and electronic components of the high performance printer
are under voltage. The device must only be opened by trained personnel
or by Leibinger service technicians.
Prior to the opening of the device the device must be switched off and the
mains plug removed.
Further information on this subject can be found in the groups
Trouble
shooting
and
Equipping/maintenance
.
2.8 Personal protective equipment
Materials are processed in this device that cause irritations and which are under pressure. In
order to avoid injury and damage the personnel must wear the following personal protective
equipment during certain work procedures:
!
suitable work clothing
!
suitable eye protection
!
suitable hand protection
More detailed information can be found in the corresponding chapters of this manual as well
as possibly in information and data leaflets of consumables.
2.9 Protective devices
In
an emergency
the device is placed idle by removal of the mains plug.
