Group 7
Data Entry
Page 80
Release 3.00
Leibinger-Jet 2 se
7.2.6 Shift code input
With this function the printer can print automatically a predefined text depending on a
predefined time period. This changing text can also combined with a fix text that will not
change depending of the time.
To input a shift code you have to proceed like following:
E.g.: „LJET“ should be written.
In the first shift at 6.00 am „LJET 001“.
In the second shift at 12.00 am „LJET 002“.
In the third shift at 8.00 pm „LJET 003“.
!
Press the touch field
<new text>
in the menu level
<E3>
.
!
The “type face menu (font menu)”
<E9>
is called up.
!
After choosing the font the line menu
<E15>
either the keyboard field
<E50>
will be
displayed if necessary.
!
Entry the text “LJET”.
!
By the touch field
<Shift>
(40) scroll as long as the menu level
<E60>
appears.
!
Press the touch field
<Shift >
(41). The Leibinger-Jet 2 changes to the shift definition
mode. T To indicate that the shift definition mode is active, the display background
will be colored black.
!
Go back to the keyboard field
<E50>
with the
<Shift>
-button (40).
!
Input 001 followed by; 002 ; 003
(so 001;002;003)
.
Pay attention!
The„
;
“ causes the seperation between the several shifts. You will find
the „
;
“ – character (42) on the menu level
<E52>
.
!
Go back to the menu level
<E60>
again with the
<Shift>
-button (40) and confirm the
input by pressing the touch field
<Shift >
(41) again.
!
By the
<Shift>
-button (40) you can leave the menu and you can finish the process in
the next possible menu level by pressing the touch field
<ESCAPE>
.
!
With the touch field
<take over >
(43) in the menu level
<E1>
the set ups will be
taken over to the production.
Observation:
The touch field
<take over >
will be only displayed if the nozzle is open!
In the menu level
<E44>
you can input the shift times. Further informations can be found
in the chapter
Expiry date
and
shift times
!
