Leibinger Jet 2 Manual Download Page 95

Page: 95 / 178

Group 7

Data Entry

Page 95

Release 3.00

Leibinger-Jet 2 se

7.4.4.3 Logoff as supervisor or advanced operator

To log off as supervisor or advanced operator either to reset the LEIBINGER-JET 2
to the operator-mode you have to proceed as following:

Press the touch field

<password management>

(90) in the menu level

<E2>

The surface of the password administration

<E7>

will be called up.

Press the touch field

<enter password>

(91).

The keyboard field

<E50>

opens to enter the password.

Enter the password of the active user again and confirm it with the touch field

<RET>

(92).

The LEIBINGER-JET 2 changes back to the password administration menu

<E7>

and the password level 3 (operator-mode) will be activated.

Figure 69

[E7]

[E50]

Enter password again

[E7]

[E2]

Summary of Contents for Jet 2



















































































































































































Search results

Summary of Contents for Jet 2

Reviews:

Related manuals for Jet 2

Brands by name

Popular brands

Leibinger Jet 2, Manual

Search results

Summary of Contents for Jet 2

Reviews:

Related manuals for Jet 2

Brands by name

Popular brands