Leibinger Jet 2 Manual Download

Page: 65 / 178

Group 6

Operation – description of the device

Page 65

Release 3.00

Leibinger-Jet 2 se

The content is under pressure even if the device has been
disconnected from the mains supply!

Ink under pressure can spray out. Prior to opening disconnect the
device from the mains supply and release the pressure!

Risk of injury!

Spraying of ink into the eyes can cause blindness. Prior to the
opening of the device eye protection must be put on!

6.5.4.1 Main pump

Figure 31

Main pump
(54-002 001 S)

In the LEIBINGER-JET 2 a main pump
with geared motor is used to gnerate
the pressure.

The current operating pressure can be
read in the sub-menu

<E29>

“Hydraulics test & parameters”.

The function of the LEIBINGER-JET 2 or the creation of the ink
pressure presupposes the

functioning of the compressor

6.5.4.2 Suction pump

Figure 32

Suction pump
(54-002 002 S)

The suction pump is a membrane
pump and is used for sucking up the
ink from the gutter.

The underpressure of the suction
pump is

≥

0.3 bar.

Summary of Contents for Jet 2



















































































































































































Search results

Summary of Contents for Jet 2

Reviews:

Related manuals for Jet 2

Brands by name

Popular brands

Leibinger Jet 2, Manual

Search results

Summary of Contents for Jet 2

Reviews:

Related manuals for Jet 2

Brands by name

Popular brands