Group 7
Data Entry
Page 112
Release 3.00
Leibinger-Jet 2 se
7.7 Service/test/system parameters
Figure 87
With the touch field
<service/test/ system-
parameter>
(150) the system administration
surface
<E8>
is called up.
The touch field
<ESCAPE>
(151) ends the
menu and leads back to the previous operating
level.
7.7.1 Direct start and time/date
Figure 88
With the touch field
<direct start>
(152)
the independent print start of the device
can be switched on and off.
At the same time the current status
“YES”
or
“NO”
is displayed in the field.
I.e. when the print head is opened, the oscillator voltage and the phase set, the ink jet
printer is ready for printing and the LEIBINGER-JET 2 begins the print procedure
independently upon receipt of a print start signal.
The touch field
<time/date set-up>
(153) enables the import of date and time. The “entry
level”
<E40>
is called up.
The entry of the current settings of date,
weekday and time can be made.
Return
<ret>
(154)=take over entry
Backspace
<bs>
(155)=deletes the last
entry
Observation:
The postponement of the date setting is done in hourly steps. The
maximum possible postponement is 23 hours.
155
[E40]
154
150
[E2]
151
153
[E8]
152