Group 9
Equipping/maintenance
Page 131
Release 3.00
Leibinger-Jet 2 se
Figure 104
Instruction label see inside of the housing cover
Storage containers (view with cover folded back)
1 – Storage container “Ink”
2 – Storage container “Solvent”
The storage containers must not be overfilled!
Only fill up to max. 2/3!
Following filling the containers must again be closed carefully.
For 8 hour operation the storage containers should be at least half filled as with most
applications the ink consumption is low (1 litre enables the printing of up to 100 million
characters depending on the matrix and the diameter of the jet).
Depending on the ink, ambient temperature and humidity the consumption of
LEIBINGER solvent can be between 20-100 ml/8 hours. With higher temperatures in
shift operation LEIBINGER solvent should therefore be checked or refilled daily.
At this point we wish to make explicit reference to the fact that it
is only when using solvent and ink from Paul Leibinger GmbH &
Co. KG that the optimum operating characteristics can be
achieved. In the event of use of other inks and solvents all
guarantee entitlements shall cease to apply.
1
2
