Group 9
Equipping/maintenance
Page 144
Release 3.00
Leibinger-Jet 2 se
9.4 Cleaning
9.4.1 Daily cleaning work
9.4.1.1 Cleaning the print head
Dangerous electrical voltage!
Contact causes serious damage through an electric shock!
Disconnect the device from the mains supply prior to opening.
Remove mains plug!
Risk of fire!
Combustible gases and liquids cause serious burns. Sources of
ignition must be kept away from the print head!
Risk of injury!
Ink escapes from the head aperture. Spraying of ink into the eyes
can cause blindness. Eye protection is necessary!
Risk of injury!
Upon contact the contents causes skin irritation. Protective
equipment is necessary!
The print head must be checked daily and cleaned in the event of recognisable dirt
through penetrating dust or ink. In this respect high release of solvent vapours should be
avoided through the economical use of Leibinger solvent (corresponding to the Leibinger
ink). This is achieved through applying the Leibinger solvent to fluff-free paper with the
spray bottle and wiping off the parts to be cleaned with this. Direct spraying off of the
print head with solvent should only be carried out with very major dirt and should be
limited to the front part of the print head. Following intensive cleaning the nozzle seal
must be lubricated with a commercially available oil (spindle and guide).
Oil must not
get into the gutter (back absorption)!
Solvent dropping down must be collected using
a solvent resistant metal vessel and disposed of properly.
This work must only be carried out by trained personnel or by
Leibinger service technicians!
