Group 7
Data Entry
Page 73
Release 3.00
Leibinger-Jet 2 se
Figure 45
Following the selection of the line(s), the
keyboard field
<E50>
opens. By means of
pressing the corresponding symbol the text
is entered. In the
display field
(11) the
illustration of the characters entered is
made in capital letters.
By means of tapping on or repeated tapping on the
<SHIFT>
fields (12) further menus
are called up for the entry of non-capital letters, special characters and extension
parameters.
With the touch field
<RET>
(13) the next line is selected for
several
lines
(e.g. for a matrix of 5x5 or 7x5).
Using the
<ESCAPE>
(14) touch field, you can exit the menu and the
entered text is saved.
In the extension´s menu
<E60>
expiration data, shift data, external texts etc. can be
integrated into the texts to be issued. There are two expiry dates available (expday1...+
expday2...), which can be programmed any way.
If the Leibinger-Jet 2 is used in shift operation the function
<shift >
(15) will be available.
You will find further information regarding this topic in the chapters
Shift code input and
Expiration-and shift times.
!
With the field
<ex. text>
(16) ) place holders are set for the importing of external text
data via the interface.
7.2.1.1 Bold print
To display a text in the imprint bold it has to be marked accordingly during the text will be
entered.
[E50]
11
12
13
14
Extension parameters E60]
Non-capital letters [E51]
Special characters [E52]
12
12
16
15
12