Group 7
Data Entry
Page 71
Release 3.00
Leibinger-Jet 2 se
7. Data entry/programming
7.1 General
Data that is to be printed by the Leibinger-Jet 2 can be entered, called-up, altered and stored
with various programming devices, PC’s etc..
Below is a description of the programming with the LCD touch display.
Figure 40
By means of touching the touch field
<main
menue>
(1) the programming level
<E2>
is
called up. During printing the touch field (2)
changes to
“take over”
instead of “power off”.
New jobs can be created while the printer is in
print mode or when it´s offline. When a Job
was created in print mode, you have to press
“take over”. The new job will be printed
imediately.
If you edit a job while printing, the methodology
is the same.
The following data entries can be performed:
!
Text administration (text management)
!
Job administration (Jobs menue)
!
Password administration (p. management)
!
Print start parameters
!
Function parameters
!
Service/test/system parameters
7.2 Text administration
Figure 41
With the touch field
<text management>
(3)
the text administration surface
<E3>
is called
up.
The touch field
<ESCAPE>
(4) ends the menu
and leads back to the previous operation level.
1
[E1]
2
3
[E2]
4
