manualshive.com logo in svg

Leibinger Jet 2, Manual, Page: 63 / 178

Share
Download
Leibinger Jet 2 Manual Download Page 63

Group 6 

Operation – description of the device 

Page 63 

Release 3.00 

 

Leibinger-Jet 2 se 

 
 

6.5.4 Hydraulics part 

 

 

 
 

 

The content is under pressure even if the device has been 
disconnected from the mains supply! 

Ink under pressure can spray out. Prior to opening disconnect the 
device from the mains supply and let off the pressure! 

 

 

Risk of injury! 

Spraying of ink into the eyes can cause blindness. Prior to the 
opening of the device eye protection must be put on! 

 

All components that are necessary for the conveying and preparation of the ink are 
accommodated in the 

Hydraulics part

. This is situated in the rear section of the device. 

 

 

 

Figure 29 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
1 – Rear wall fastening  
      screws 
 
2 – Rear wall 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

 

 

The hydraulic parts are made accessible for service purposes through opening of the 
fastening screws and removal of the rear wall (see illustration).  
 

 

 

This work must only be carried out by trained personnel or by 
Leibinger service technicians! 

 
 
 

 

 

1

2

Summary of Contents for Jet 2



















































































































































































Reviews:

No comments