manualshive.com logo in svg

Leibinger Jet 2, Manual, Page: 149 / 178

Share
Download
Leibinger Jet 2 Manual Download Page 149

Group 9 

Equipping/maintenance 

Page 149 

Release 3.00 

 

Leibinger-Jet 2 se 

 
 

Checking of the jet cleaning carried out 
 

With repeated switching of the ink flow valve (by pressing of the ink on/off switch) the ink 
jet must always assume the same position. If this is not the case, renewed cleaning is 
necessary. 

 
 
 

9.4.3.2 Cleaning the suction pump 

  

 
 

 

The content is under pressure even if the device has been 
disconnected from the mains supply! 

Ink under pressure can spray out. Prior to opening disconnect the 
device from the mains supply and let off the pressure! 

 

 

Risk of injury! 

Spraying of ink into the eyes can cause blindness. Prior to the 
opening of the device eye protection must be put on! 

 

 

Risk of injury! 

Upon contact the contents causes skin irritation. Protective 
equipment is necessary! 

 

 

This work must only be carried out by trained personnel or by 
Leibinger service technicians! 

 

 

 

Figure 113 

 

 
 
 
 
 
 
 
 
 
 
Suction pump 
(54-002 002 S) 
 

 

The suction pump works with an 
underpressure > 0.3 bar. If this is not 
achieved, dirtying of the valve reeds or 
damage to the working membrane can 
be present. 
 

 

 

Summary of Contents for Jet 2



















































































































































































Reviews:

No comments