manualshive.com logo in svg

Leibinger Jet 2, Manual, Page: 67 / 178

Share
Download
Leibinger Jet 2 Manual Download Page 67

Group 6 

Operation – description of the device 

Page 67 

Release 3.00 

 

Leibinger-Jet 2 se 

 
 

6.5.4.4 Leak detection 

 

 

 

 

 

An additional safety measure in the LEIBINGER-JET 2 is the leak detection. To detect a 
leak in the hydraulic part i.e. if ink or solvent on the basis of slightly combustible solvents 
escape, the operation of the device is aborted and an acoustic alarm triggered. 

 

 

 

Figure 35 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

  

Leak 

detection 

1 – Leak sensor (54-003 340 SA) 

 
 
 

6.5.5 Print head 

 

 

 

 

 

 

Dangerous electrical voltage! 

Contact causes serious damage through an electric shock! 
Disconnect the device from the mains supply prior to opening. 
Remove mains plug! 

 

 

The content is under pressure even if the device has been 
disconnected from the mains supply! 

Ink under pressure can spray out. Prior to opening disconnect the 
device from the mains supply and let off the pressure! 

 

 

1 

Summary of Contents for Jet 2



















































































































































































Reviews:

No comments