Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 994/1246
9.3.23.2
Viewing Port-Channel Information Page
Non-Configurable Data
Port Channel
- The Slot/Port identification of the Port Channel.
Port Channel Name
- The name of the Port Channel.
Port Channel Type
- The type of this Port Channel.
Admin Mode
- The Administrative Mode of the Port Channel, enable or disable.
Link Status
- Indicates whether the Link is up or down.
STP Mode
- The Spanning Tree Protocol Administrative Mode associated with the Port Channel.
The possible values are:
Disable - spanning tree is disabled for this Port Channel.
Enable - spanning tree is enabled for this Port Channel.
Static Mode
– Indicates whether port channel is static or dynamic.
Link Trap
- Whether or not a trap will be sent when link status changes. The factory default is
enabled.
Configured Ports
- A list of the ports that are members of the Port Channel, in Slot/Port notation.
There can be a maximum of 8 ports assigned to a Port Channel.
Active Ports
- A listing of the ports that are actively participating members of this Port Channel, in
Slot/Port notation. There can be a maximum of 8 ports assigned to a Port Channel.
Load Balance
– Indicates load-balance mode of port channel. The possible values are:
Source MAC, VLAN, Ethertype, and source port
Destination MAC, VLAN, EtherType and source port.
Source/Destination MAC, VLAN, Ethertype, and source port
Source IP and Source TCP/UDP Port.
Destination IP and Destination TCP/UDP Port
Source/Destination IP and source/destination TCP/UDP Port
Enhanced hashing mode
Command Buttons
Refresh
- Refreshes the data on the screen with the present state of the data in the switch.
