Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 635/1246
7.2.1.7
show ip route connected
This command displays directly connected routes.
Syntax
show ip route connected
Default Setting
None
Command Mode
Privileged Exec
Display Message
Route Codes:
Displays the key for the routing protocol codes that might appear in the routing table
output.
The command displays the routing tables in the following format:
Code IP-Address/Mask [Preference/Metric] via Next-Hop, Interface
Code:
The codes for the routing protocols that created the routes.
IP-Address/Mask:
The IP-Address and mask of the destination network corresponding to this route.
Preference:
The administrative distance associated with this route. Routes with low values are
preferred over routes with higher values.
Metric:
The cost associated with this route.
via Next-Hop:
The outgoing router IP address to use when forwarding traffic to the next router (if
any) in the path toward the destination.
Interface:
The outgoing router interface to use when forwarding traffic to the next destination.
