Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 742/1246
8.2
Internet Group Management Protocol (IGMP) Commands
This section provides a detailed explanation of the IGMP commands. The commands are divided
into the following different groups:
Show commands are used to display device settings, statistics and other information.
Configuration commands are used to configure features and options of the switch. For
every
configuration command there is a show command that will display the configuration setting.
8.2.1
Show Commands
8.2.1.1
show ip igmp
This command displays the system-wide IGMP information.
Syntax
show ip igmp
Default Setting
None
Command Mode
Privileged
Exec User
EXEC
Display Message
IGMP Admin Mode:
This field displays the administrative status of IGMP. This is a
configured value.
Interface:
Valid slot and port number separated by forward slashes.
Interface Mode:
This field indicates whether IGMP is enabled or disabled on the interface. This is
a configured value.
Protocol State:
This field indicates the current state of IGMP on this interface. Possible values are
Operational or Non-Operational.
