Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 1015/1246
supplicant. The default value is 60. Changing the value will not change the configuration until the
Submit button is pressed.
Transmit Period (secs)
- This input field allows the user to configure the transmit period for the
selected port. The transmit period is the value, in seconds, of the timer used by the authenticator
state machine on the specified port to determine when to send an EAPOL EAP Request/Identity
frame to the supplicant. The transmit period must be a number in the range of 1 to 65535. The
default value is 30. Changing the value will not change the configuration until the Submit button is
pressed.
Guest VLAN Id (secs)
- This field allows the user to configure Guest Vlan Id on the interface. The
valid range is 0 - L7_PLATFORM_MAX_VLAN_ID.The default value is 0. Changing the value will not
change the configuration until the Submit button is pressed.
Enter 0 to reset the Guest Vlan Id on the
interface.
Guest VLAN Period (secs)
- This input field allows the user to enter the guest Vlan period for the
selected port. The guest Vlan period is the value, in seconds, of the timer used by the GuestVlan
Authentication. The guest Vlan timeout must be a value in the range of 1 and 300. The default value
is 90. Changing the value will not change the configuration until the Submit button is pressed.
Unauthenticated VLAN ID
- This input field allows the user to enter the Unauthenticated VLAN ID
for the selected port. The valid range is (0 to 4093).The default value is 0. Changing the value will not
change the configuration until the Submit button is pressed. Enter 0 to clear the Unauthenticated
VLAN ID on the interface.
Supplicant Timeout (secs)
- This input field allows the user to enter the supplicant timeout for the
selected port. The supplicant timeout is the value, in seconds, of the timer used by the authenticator
state machine on this port to timeout the supplicant. The supplicant timeout must be a value in the
range of 1 to 65535. The default value is 30. Changing the value will not change the configuration
until the Submit button is pressed.
Server Timeout (secs)
- This input field allows the user to enter the server timeout for the selected
port. The server timeout is the value, in seconds, of the timer used by the authenticator on this port to
timeout the authentication server. The server timeout must be a value in the range of 1 to 65535. The
default value is 30. Changing the value will not change the configuration until the Submit button is
pressed.
Maximum Requests
- This input field allows the user to enter the maximum requests for the
selected port. The maximum requests value is the maximum number of times the authenticator state
machine on this port will retransmit an EAPOL EAP Request/Identity before timing out the
supplicant. The maximum requests value must be in the range of 1 to 10. The default value is 2.
Changing the value will not change the configuration until the Submit button is pressed.
Reauthentication Period (secs)
- This input field allows the user to enter the reauthentication period
for the selected port. The reauthentication period is the value, in seconds, of the timer used by the
authenticator state machine on this port to determine when reauthentication of the supplicant takes
place. The reauthentication period must be a value in the range of 1 to 65535. The default value is
3600. Changing the value will not change the configuration until the Submit button is pressed.
Maximum Users -
Defines the maximum number of clients that can get authenticated on the port in
the MAC-based dot1x authentication mode. The range is 1 to 16. The default value is 16. Changing
the value will not change the configuration until you click the Submit button.
Command Buttons
Initialize
- This button begins the initialization sequence on the selected port. This button is only
selectable if the control mode is 'auto'. If the button is not selectable, it will be grayed out. Once this
button is pressed, the action is immediate. It is not required to press the Submit button for the action
to occur.
